Manual

4-22 Configuration and Characterization
c. Click on the Fault Message field and type in a short fault message.
 A fault message can contain a wildcard character as part of the text string by adding
an asterisk (*) to the text.
 This message will be displayed on the Fault Monitor.
4. Click on the
Fault Color field and select a color.
 This is the color of the Fault Message displayed on the Fault Monitor.
5. Click on the
Trigger Message field and select a trigger for the fault from the dropdown
menu or type in a fault log message.
 The text string must match exactly and should be unique to the desired behavior.
6. Click on the
Clear Message field and select the event that clears the message from the
dropdown menu or type in a fault log message. See Figure 4-21.
 The text string must match exactly and occur only after the event to clear the fault.
Figure 4-21 Log Trigger Faults Dialog Box
7. Create a Subsystem.
a. Click on
Configure > Status Monitoring > Beacon Configuration > Subsystems.
 The Subsystems dialog box opens (Figure 4-22).
b. Click on
New.
 You will be prompted to enter a new Subsystem name.