Manual

3-14 Tour of Easy Coat
3.7 Shortcut Keys
If necessary, the operator can use ECXP to reposition the robot, move the conveyor and toggle the camera
window ON/OFF.
Key Combination Function
[Ctrl] + up arrow Move robot in positive y, slowly
[Ctrl] + down arrow Move robot in negative y, slowly
[Ctrl] + right arrow Move robot in positive x, slowly
[Ctrl] + left arrow Move robot in negative x, slowly
[Ctrl] + [Shift] + up arrow Move robot in positive y, quickly
[Ctrl] + [Shift] + down arrow Move robot in negative y, quickly
[Ctrl] + [Shift] + right arrow Move robot in positive x, quickly
[Ctrl] + [Shift] + left arrow Move robot in negative x, quickly
[Ctrl] + [Z] + right arrow Move robot in positive z, slowly
[Ctrl] + [Z] + left arrow Move robot in negative z, slowly
[Ctrl] + [Shift] + [Z] + right arrow Move robot in positive z, quickly
[Ctrl] + [Shift] + [Z] + left arrow Move robot in negative z, quickly
[Ctrl] + [Alt] + up arrow Move conveyor rails in positive y, slowly
[Ctrl] + [Alt] + down arrow Move conveyor rails in negative y, slowly
[Ctrl] + [Alt] + right arrow Move conveyor chain in positive x, slowly
[Ctrl] + [Alt] + left arrow Move conveyor chain in negative x, slowly
[Ctrl] + [Shift] + [Alt] + up arrow Move conveyor rail in positive y, quickly
[Ctrl] + [Shift] + [Alt] + down arrow Move conveyor rail in negative y, quickly
[Ctrl] + [Shift] + [Alt] + right arrow Move conveyor chain in positive x, quickly
[Ctrl] + [Shift] + [Alt] + left arrow Move conveyor chain in negative x, quickly
[F4] Toggle Camera Window On/Off
[F6] Run the active pattern or procedure
[F9] Run the Main Pattern in the current program