Manual

2-10 Installation
4. Select Configure > Reconfigure from the ECXP Edit Screen.
 The Configure Dialog box opens (Figure 2-9).
Figure 2-9 ECXP Configure Dialog Box
5. Select the item to be configured by clicking on it.
 To select more than one item, hold down the [Ctrl] key while selecting additional items.
6. When you are finished, click on
OK.
7. To close the ECXP Edit Screen and return to the Operator Screen, click on
or select
File > Exit from the Edit Screen menu bar.
8. To exit ECXP, click on
or select File > Exit from the Operator Screen menu bar.
9. Restart ECXP to perform the configuration procedure.
 Depending on the items to be reconfigured, you will be prompted to answer a series of
questions. See 2.5.1 Initial Setup Procedure.