Manual

2-6 Installation
2.5.1.2 Tools Configuration
After you have defined your system, you will be prompted to define your tool (fluid applicator). To select
more than one tool, hold down the [
Ctrl] key and click on the desired tools. See Figure 2-4.
Figure 2-4 Tools Configuration
Depending on the applicator and options selected, you will be prompted to respond to some or all of the
following questions.
1. Does this applicator have tilt?
2. Does this applicator have rotate?
3. Please select your rotate mechanism (Figure 2-5).
Figure 2-5 Rotate Mechanism Configuration
4. Does this applicator have a nozzle extension?
5. Will this tool control dual applicators?
6. One applicator has been configured. Do you need another applicator?
7. Will the tool use a needle finder?
8. Do you require the LowAir tool? (Swirl Applicator only)
9. Do you require the HighAir tool? (Swirl Applicator only)
10. Does the camera have attached lighting? (Answer yes if you have pattern recognition,
otherwise answer no).