Manual

2-4 Installation
2.5 ECXP Configuration
The first time ECXP is run, a setup procedure runs, asking you to define your system hardware.
Responses to each question are written to the ECW.INI file. If you change your system hardware or
reinstall the software, use the Reconfigure feature to re-run the setup procedure. See 2.5.2 Reconfigure.
 NOTE In most cases, ECXP arrives already installed and configured for your coating system
from the Nordson ASYMTEK factory.
2.5.1 Initial Setup Procedure
 NOTE This procedure runs the first time you start ECXP. To reconfigure system hardware, see
2.5.2 Reconfigure.
2.5.1.1 System Configuration
1. Double-click the
ECXP icon on the Windows desktop to start ECXP.
 ECXP opens and you will be prompted to select your language (Figure 2-2).
2. Select your language and click
OK.
Figure 2-2 Select Language