Manual

5-36 Programming
2. To maximize the image, refresh by clicking on any other pattern or procedure in the
Program Structure Tree and then clicking back on the current pattern as shown below.
5.13.5.4 Undocking/Redocking
Undocking places the image in a separate window and provides greater flexibility for enlarging and
zooming in on the image.
To undock an image:
1. Move the cursor to the undocking bar.
 The undocking bar is represented by the two vertical lines on the left border of the
Graphic Display. See Figure 5-39.
2. Left-click and drag to undock the Graphic Display from the Edit Screen.
3. Resize the undocked image by positioning the cursor at a corner of a display and dragging it
open. See Figure 5-40.
Figure 5-39 Undocking Bar Figure 5-40 Resizing an Undocked Image
 NOTE When working with multiple windows, the easiest way to cascade the windows is
shown in Figure 5-41. Click on the title bar to bring a window to the front. If the Edit
Screen is hidden by the Operator Screen, click on
View > Edit Mode to bring the Edit
Screen to the front. To bring the undocked image to the front, click on any other pattern
and then back on the current pattern. You may also toggle
View > Graphic Display off
and on again.