User Manual

Configuration and Characterization 4-1
4 Configuration and Characterization
4.1 Overview
Your coating system is configured at the Nordson ASYMTEK factory prior to shipping. However, if any
components have been changed or moved, it may be necessary to reconfigure them in ECXP. This section
contains the following procedures:
Tool Configuration Needle Finder Configuration
Characterization Bar Code/DataMatrix Scanner Configuration
Fixture Configuration Reconfiguring System Hardware
Conveyor Configuration Production Configuration
Inverter Configuration Log Configuration
Robot Configuration Product Map Configuration
Beacon Configuration Maintenance Manager
Fan Width Configuration Custom Buttons
4.2 Safety First
Before configuring any of the coating system components, please review the information presented in the
safety section of the manual for your particular coating system.
CAUTION! The procedures in this section should only be performed by a trained service
technician.
4.3 Recordkeeping
At a minimum, the following information should be recorded in the coating system maintenance records:
Procedure Type
Date
Technician Name(s)
Post-procedure Functional Test Results