User Manual

Appendix B- Instruction Properties B-13
Repeat
Description: Instructions between Repeat and End instructions are executed a set number of times.
Creates a loop between the Repeat instruction and the End instruction.
Syntax:
REPEAT <number of times>
[Instructions]
END
Properties:
Property Description
Number of Times
Number of times to execute loop.
Rotate Home
Description: Rotates the tool to its origin. Only supported by Select Coat 4-axis or 5-axis dispenser.
Properties:
Property Description
Tool
Default = Tool displayed in Current Tool Selector when instruction created. Tool
to use for this instruction. Click on List button to select different tool.