User Manual

Programming 5-41
5. Undock the image and enter pattern instructions for "Side 1." See 5.13.6 Using the
Graphics Display for Programming.
6. Click on
Save .
7. Repeat Steps 2 to 6 for the second side of the board. Replace "Side 1" references with
"Side 2".
 NOTE For most applications, you will only use one image, imported with the
Image Name 1 property. The only time you will import an image with the
Image Name 2 property field is if you have an Invert instruction in the
pattern.
5.13.7.1 Main Pattern Graphics Display
To view both sides of the board in the Main Pattern, import both images using
File > Import Board
Image > First Side > Second Side
. Both images will be displayed in the Graphics Display
simultaneously
ONLY when you have the Main Pattern selected and an Invert instruction is present in the
Main Pattern. See Figure 5-46.
Figure 5-46 Main Pattern Displaying Both Sides of Board