User guide

4-16 Configuration and Characterization
4.11 Fan Width Configuration
If your system is equipped with the optional Laser Fan Width Control feature, you will need to perform a
Fan Width Setup. For additional information, refer to the manual for your Fan Width Control System or
contact your Asymtek representative.
To perform a fan width setup:
1. Select
Configure > Fan Width Setup > Toolname from the ECXP Edit Screen.
! The Fan Width Control configuration window (
Figure 4-13) opens.
2. Enter the desired values.
! Menu options are described in
Table 4-3.
3. Perform a Sensor Setup procedure. See
4.11.1 FWC Sensor Setup.
Figure 4-13 Fan Width Control Configuration Window