User guide

Configuration and Characterization 4-15
d. Click on the Fault Color field and select a color.
! This is the color of the Fault Message displayed on the Fault Monitor.
e. Click on the
Trigger Message field and select a trigger for the fault from the dropdown
menu or type in a fault log message.
f. Click on the
Clear Message field and select the event that clears the message from the
dropdown menu or type in a fault log message.
4. Create a Subsystem.
a. Click on
Configure > Status Monitoring > Beacon Configuration > Subsystems.
b. Click on
New.
Figure 4-12 Subsystem Dialog Box
c. Click on the Name field and type in a name for the subsystem.
d. Click on the
State List field, then the More button in the field.
! The State List dialog opens.
e. Click on
New twice to create two states.
f. Click in the
Name field and give each state a name, such as On or Off, or Open or
Closed.
g. Click in the
Trigger field and select an input from the dropdown menu or type in a log
message.