User guide

2-6 Installation
2.5.2 Reconfigure
" NOTE If you change your system hardware or reinstall the software, use the Reconfigure feature
to run the setup procedure.
To reconfigure ECXP:
1. If necessary, install the ECXP software as instructed in
2.4 ECXP Installation Procedure.
2. Double-click the
ECXP icon on the Windows desktop to start ECXP.
! The ECXP Operator Screen shown in
Figure 2-4 opens.
" NOTE The product program from the previous session opens when you start ECXP.
Figure 2-4 ECXP Operator Screen
3. Select Edit > Edit Mode from the ECXP Operator Screen menu bar to access the ECXP Edit
Screen. See
Figure 2-5.