Manual

Troubleshooting 6-1
6 Troubleshooting
6.1 Overview
If you have difficulty running your coating programs, use this section to identify a possible solution to the
problem. If you have difficulties not listed in this section, or the suggested solution does not correct the
problem, contact Asymtek Technical Support. This section covers the following topics:
• Event Monitor • Travel Limit Errors
• Programming Errors • Z-Axis Related Errors
• Conditional Instruction Errors • Fan Width Control Errors
6.2 Event Monitor
If an error occurs during routine production, production stops immediately at the point in the program
where there the error occurs. A color-coded error or warning message, including a description of why the
error occurred, will be displayed on the Event Monitor on the Operator Screen. Error message are
displayed in red text and warning messages are displayed in yellow. See Figure 6-1. Use the error
messages for troubleshooting purposes.
Figure 6-1 Event Monitor Error Messages
If the Error message is longer than the screen is capable of showing, double-click on it and the full text of
the message will be displayed in a dialog box. See Figure 6-2.
Figure 6-2 Displaying Full Text of Error Message