Manual

5-18 Programming
5.9.5 Creating a Procedure
To create a procedure:
1. Start ECNT and select
Edit > Edit Mode to open the Edit Screen.
2. Make sure the desired product or macro program is open. If not, open it.
3. Click the
New Procedure button on the toolbar.
! A new blank procedure will be created. See Figure 5-14.
Figure 5-14 Creating a Procedure
4. Enter a procedure name in the property section.
! DO NOT use reserved procedure names. See 5.6.1 Reserved Procedures.
5. Insert procedure instructions by clicking on appropriate command buttons. Refer to
5.9.3.1 Inserting Program Instructions.
6. Click on Save
.