Manual

Configuration and Characterization 4-9
5. Install the nozzle on the Fluid Dispensing Applicator. The nozzle must be installed in order to
accurately teach the Z coordinate. See Figure 4-8 for coordinate location.
a. To teach the Z-coordinate, carefully lower the nozzle until it is just touching the surface
of the board (Z-coordinate on the Side View).
b. Click on the
Teach Z button.
Figure 4-8 Teaching XYZ Coordinates
6. Click on Close when done.
X-Axis
Y-Axis
Z
Side View
Y
Top View
X
Z-Axis