Manual

3-2 Tour of Easy Coat
3.4 Starting/Exiting ECNT
To Start/Exit ECNT:
1. Double-click the
ECNT icon on the Windows desktop.
! As an alternative, you may click on the Windows Start menu and select
Programs > ECNT to start the ECNT software.
! The Dispenser will find Home in the Z-Axis, Y-Axis, and X-Axis, respectively.
! The ECNT Operator Screen shown in Figure 3-1 will open.
" NOTE The Operator Screen will vary slightly depending upon system configuration
(batch or conveyor).
Figure 3-1 ECNT Operator Screen
2. To exit the ECNT program, select File > Exit from the menu bar or click the on the upper
right hand corner of the title bar.
Conveyorized System
Batch System