Instruction Manual

30 Operation
16. Inspect the syringe for air bubbles in the fluid, and reject any samples that have visible voids.
17. Insert the syringe or cartridge into the clip.
18. Attach a receiver head to the syringe or cartridge.
19. Use the appropriate Luers and adapters to connect the fluid syringe to the DP-3000 stopcock.
! Depending on the size of your syringe or cartridge, you may need to add combinations of
plastic Luers and adapters so that the fluid syringe connects correctly and securely to the
DP-3000 stopcock. See Figure 3-21 and Figure 3-22 for examples. Your actual
combination of Luers and adapters may vary. See Figure 3-23 for some of the Luer
adapter options.
20. Connect the syringe receiver head hose to the clear fluid hose connection on the dispensing
head. See Figure 3-16 to Figure 3-18 for connection location, depending on your model of
dispensing system.
Figure 3-21 Installing a Syringe
Syringe of Fluid
(30cc shown)
Receiver Head
Plastic Luer
Adapter
Receiver Head
Hose