Instruction Manual

Operation 29
14. Install a priming port stopcock to the priming port. See Figure 3-19.
! Asymtek offers priming port adapters other than the type shown in Figure 3-19 which may
better suit your specific needs. See “Priming Port Stopcock Options” later in this section
for more information.
Figure 3-19 Installing Priming Port Stopcock
15. Use the 2.5-mm hex key to install the appropriate size syringe or cartridge clip. Refer to
Figure 3-20 for the various available syringe and cartridge clips.
Figure 3-20 Syringe and Cartridge Clips
5 cc
10 cc
30 cc
2.5 or 6 oz.
Cartridge Clip
Priming Por
t
Luer Adapte
r
Priming Por
t
Stopcoc
k
(close
d
position)