Manual

4 Introduction
Dispensing Valves
The DispenseMate 550 Series Dispensing Systems support the following Asymtek jets, pumps, and
valves. Refer to “Installing the Dispensing Valve” and “Pneumatic Connections” in the Installation
section for additional information.
Dispensing Valve Configuration
Valve Model
Valve Air
Connection
Fluid
Pressure
Connection
DJ-9000/DJ-2100 DispenseJet® Series P1 P2
DV-7000/DV-8000 Heli-Flow® Pumps* N/A P2
DV-01 N/A P2
DV-07 P1 P2
DV-03HPA P1 P2
DV-05A P1 P2
DV-07 P1 P2
DV-09 P1 P2
*When using the DV-7000 or DV-8000 valve, make sure that the Valve Selector (U27) switch, located on
the main board inside the electronics pan (Figure 1-1), is set to the proper position. The default setting is
DV-8000. The U27 switch setting does not affect any of the other valves.
Figure 1-1 U27 Switch