Manual

2 Introduction
Safety First
Operation of your DispenseMate 550 Series Dispensing System involves air pressure, electrical power,
mechanical devices, and the use of hazardous materials. It is essential that every person servicing or
operating the dispensing system fully understands all hazards, risks, and safety precautions. Refer to the
Safety section for additional information.
WARNING! CAUTION!
Consult the Material Safety Data Sheet (MSDS) for all fluids used with the
dispensing system. The MSDS provides material usage instructions, disposal
instructions, and safety precautions.
Getting Started
Manuals Supplied
Your DispenseMate 550 Series Dispensing System arrives with manuals for installation and operation of
major system components and software. For some system components, you may receive Original
Equipment Manufacturer (OEM) manuals. Generally, these OEM manuals are only needed for reference
and advanced troubleshooting. Consult only Asymtek manuals unless directed to do otherwise by the
manuals themselves or by the Asymtek Technical Service Group.
Below is a sample list of manuals that may be shipped with your DispenseMate 550 Series Dispensing
System. The optional manuals listed may or may not be included depending on system configuration.
• DispenseMate 550 Series User Guide
• Fluidmove for Windows NT User Guide
• Dispensing Valve Installation and Operations Manual (specific to your valve)
• Original Equipment Manufacturer Manuals (as applicable)
Training
In order to optimize the full capabilities and features of your dispensing system, Asymtek recommends
certification for all operators, technicians, and engineers using, programming, and servicing the
dispensing system.
Asymtek offers several levels of training courses to enable customer operators, technicians, and engineers
to become fully certified in dispensing system safety, operation, hardware, software, and fluid
applications. For more information on training courses and certification, contact Asymtek.