Manual

Specifications 49
7 Specifications
Overview
DispenseMate 550 Series Dispensing System specifications are presented in Tables 7-1 through 7-3.
These specifications are intended as a convenient reference for personnel planning system relocation,
installation, or operation, and others that may have an interest in system performance characteristics.
Safety First
Familiarity with the performance specifications and facility requirements in this section can provide
information leading to safe operation of the dispensing system. For additional safety information, refer to
the Safety section.
DispenseMate 553
Table 7-1 Facility Requirements
Facility Requirements
System Footprint* 570mm x 685mm (22.4 in. x 26.9 in.)
Height 675mm (26.5 in.)
Weight 45 kg (99.2 lbs.)
Compressed Air Dry; 40° F
Dew Point
551 kPa (80 psi, 5.5 Bar), up to 85 l/min (1 SCFM)
maximum, depending on configuration
Main Power Supply 100/120/220/240 VAC, 50/60 Hz, 10 A
*Without tooling.
DispenseMate 555
Table 7-2 Facility Requirements
Facility Requirements
System Footprint* 770mm x 885mm (30.3 in. x 34.8 in.)
Height 675mm (26.5 in.)
Weight 70 kg (165.3 lbs.)
Compressed Air Dry; 40° F
Dew Point
551 kPa (80 psi, 5.5 Bar), up to 85 l/min (1 SCFM)
maximum, depending on configuration
Main Power Supply 100/120/220/240 VAC, 50/60 Hz, 10 A
*Without tooling.
Software
Table 7-3 Software Specifications
Software Specifications
Software Fluidmove for Windows NT (FmNT) Version 4.8 or later