Manual

Troubleshooting 45
6 Troubleshooting
Overview
If you have difficulty operating your dispensing system, use this section to identify a possible solution to
the problem. If you have difficulties not listed in this section, or the suggested solution does not correct
the problem, contact Asymtek Technical Support. This section covers the following troubleshooting
procedures:
• Basic System Troubleshooting
• System Power
• Pneumatic
• Dispensing Head
• Height Sensor
• Vision System
• Needle Heater
" NOTE The troubleshooting procedures in this section are operator level procedures. Refer to the
FmNT User Guide or Online Help for assistance with FmNT.
Safety First
It is essential that you follow all safety warnings and consider all safety warning labels when performing
the troubleshooting procedures. Refer to the Safety section for specific information.
WARNING! Allow only qualified personnel to perform the following tasks. Observe and follow
the safety instructions in this document and all other related documentation.
Failure to do so may cause serious bodily injury to the user or damage to the
equipment.
Record Keeping
The type of procedure performed should be recorded in maintenance records for the dispensing system.
Dates, part numbers/serial numbers of replaced parts, names of technicians, and other pertinent data
should be recorded.