Manual

Operation 37
5. In the Production Window, click on the Load button.
! The Open dialog box will appear.
6. In the Open dialog box, select the program you wish to run and click on
Open.
See Figure 4-9.
! The current program name will appear in the Production Window.
Figure 4-9 Production Window – Load Program
7. In the Production Window, click on Run and then click on the Run Production button.
! The Run Window opens.
8. Click on
Go to start the dispensing process. See Figure 4-10.
Figure 4-10 Production Window – Run Program
" NOTE Refer to the FmNT User Guide for programming instructions.
Abort
Go
Stop
Pause