Manual

30 Operation

Using the Mouse

To operate position controls with the Mouse:

1. In the FmNT Main Window, click on

Jog.

! The Position Controls dialog box opens. See Figure 4-3.

! The Dispenser radio button will be selected, indicating that the Dispensing Head

position controls are active.

Item Description

1 Y-axis Controls (forward and back movement)

2 X-axis Controls (side to side movement)

3 Dispenser Radio Button

4 Home Button

5 Z-axis Controls (up and down movement)

Figure 4-3 Dispensing Head Position Controls

" NOTE Position Controls can be accessed from the FmNT Main Window, the Production Window,

the Run Window, the Programming Window, and the Tools Window. For additional

information on Position Controls, refer to the FmNT User Guide or Online Help.

2. Dispensing Head position controls (Figure 4-3) operate as follows:

! On the X-Y control panel, the arrows pointing to the Left move the Dispensing Head to

the left and the arrows pointing to the

Right move it to the right.

! On the X-Y control panel, the arrows pointing Up move the Tooling Plate toward the front

of the dispensing area and the arrows pointing

Down move it toward the back.

! On the Z control panel, the arrows pointing Up move the Dispensing Head upward and

the arrows pointing

Down move it downward.