Instruction Manual

4 Running the VAPR Procedure
5. Click on Edit.
 The Valve 1 Settings window opens (Figure 2-2).
Figure 2-2 Valve 1 Settings
6. Make sure there is a checkmark next to Change Default Fluid Pressure Setting in the Fluid
Pressure section. If not, click the box to select it.
7. Click OK to return to the Setup Valves window.
8. Click OK again to return to the Fluidmove Main Window.
9. Verify/select the valve offset routine.
a. In the Fluidmove Main Window, click on Configuration>Setup Scripts Options.
b. Verify that the proper script file (installed with the VAPR kit) is selected. The script file
(XXXXX.pss) is displayed below the Prompted Setup button.