User Manual

Maintenance and Service 31
DJ-9520 Heat Exchanger Version
a. Pull down the Heat Exchanger Handle to release and remove the Heat Exchanger.
b. While the Release Handle is still down, loosen the four socket head cap screws using a
2.5 mm hex wrench through the holes in the cover on the junction box (DO NOT
remove the three (3) button head screws).
c. Remove the solenoid, junction box, Heat Exchanger Handle, and Reservoir as a unit
from the jet body.
Figure 6-27 Loosening the Four Socket Head Screws (DJ-9520)