User Manual

22 Maintenance and Service
Table 6-1 Nozzle Cleaning Tools
Nozzle Sizes Part No. Nozzle Cleaning Tool
0.025mm (0.001in)
0.050mm (0.002in)
Contact Nordson
ASYMTEK
customer service
to order
Nozzle Cleaner
0.075mm (0.003in) 7208918 VIAL WIRE,25PC., .0025 DIA
0.100mm (0.004in)
0.125mm (0.005in)
0.150mm (0.006in)
901935 KIT,WIRE,CLN,MUSIC W, .003” DIA.
0.200mm (0.008in)
0.250mm (0.010in)
901922 KIT,WIRE,CLN,MUSIC W, .007” DIA.
0.300mm (0.012in)
0.350mm (0.014in)
901923 KIT,WIRE,CLN,MUSIC W, .011” DIA.
0.400mm (0.016in) 901924 KIT,WIRE,CLN,MUSIC W, .014” DIA.
0.500mm (0.020in)
0.600mm (0.024in)
0.700mm (0.028in)
0.800mm (0.032in)
0.900mm (0.036in)
1.000mm (0.040in)
6. Separate the seat and nozzle (active nozzle only).
7. Clean the inside of the seat with a cotton swab and recommended solvent (fluid specific).
The nozzle and seat can be soaked in solvent and set in an ultrasonic cleaner.
8. Blow nozzle and seat with compressed air.
WARNING! Always wear protective eyewear/goggles when using compressed air to
clean parts.
9. Align the nozzle with the seat and press together (active nozzle only).