User Manual

6 Safety
2.4 Preventing Equipment and Workpiece Damage
• Immediately push the EMO button on the dispensing system if the dispensing system,
DJ-9500, or a workpiece is in danger of being damaged.
• Use standard Electrostatic Discharge (ESD) precautions when working near sensitive
components. Always wear a grounding strap and connect it to the ESD ground before
handling workpieces and equipment.
• Perform all recommended DJ-9500 maintenance procedures at the suggested intervals.
• Immediately contain and clean up any caustic or conductive fluid spills as recommended in
the material manufacturer’s MSDS.
• If fluid gets into internal portions of the DJ-9500, immediately contact Nordson ASYMTEK
Technical Support.
• Use only replacement parts that are designed for use with the original equipment. Table 9-1
contains an illustrated parts list.
CAUTION! The DispenseJet Series DJ-9500 is a precision instrument of inherently safe
design. The use of any dispensing fluid and the related choice of solvent for
cleaning, as well as all associated safety precautions is the responsibility of the
end-user. Consult with your fluid supplier for recommendations on Personal
Protective Equipment and safety practices.
2.5 Material Safety
• Follow Material Safety Data Sheet (MSDS) recommendations for the proper handling,
cleanup, and disposal of hazardous materials.
• Know the MSDS recommendations for treatment of injury resulting from exposure to
hazardous materials.
• When working with multiple fluids, refer to the MSDS to ensure the materials are
compatible.
• Always wear appropriate Personal Protective Equipment (PPE) as recommended by facility
safety practices and the material manufacturer’s MSDS.