User Manual

4 Introduction
1.2 Specifications
Characteristic Specification
Size Width: 33 mm
Height: 142 mm
Depth: 100 mm (135mm w/ Body Heater)
Seat and Nozzle Carbide / Stainless Steel
Needle Assembly Carbide
Fluid Seal PEEK or Flouroloy
Fluid Chamber O-ring Ethylene Propylene or Viton
Jet Body 6061-T6 Aluminum/Nickel Plated
NPE 303 Stainless Steel
Needle Assembly Bearings PEEK
Thermal Control Body 6061-T6 Aluminum
Nickel Plated
Feed Tube Assembly Fitting Female Luer per ANSI/HIMA MD70.1-1983
Maximum Cycle Frequency 200 Hz.
Minimum Valve Air Pressure 5.5 bar (80 psi)
Solenoid 24 VDC, 5 watts
Nozzle Heater (TCA) 24 VDC, 14.7 Watts, 40 ohms
Thermal Control RTD 100 ohm, platinum
Maximum Heater Set Point 100 °C
Body Heater Ch2 24 VDC, 50 Watts, 11.5 ohms
Body Heater Rtd 100 ohm, platinum
Max Heater Set Point 100 °C
*At Maximum Cycle Rate
 NOTE Nordson ASYMTEK manufactures each DJ-9500 under strict manufacturing quality
control standards to ensure precise and reliable performance. To obtain maximum
performance, please read instructions carefully. Please contact Nordson ASYMTEK for
the suitability of the DJ-9500 technology for other applications.