Manual

Maintenance and Service 29
To remove and disassemble the Upper Body (Figure 5-3):
1. Remove the two screws securing the cap to the upper body.
2. If not already separated, remove the two screws securing the lower body to the upper body and
carefully remove the lower body from the needle and set it aside. Leave the needle intact in the
upper body for now.
3. For future reference, note the fitting and plug locations on the upper body.
4. Using a flat head screwdriver, remove the fitting and the plug from the upper body.
Item Description Item Description
1 Hex Head Screw (two) 4 Upper Body
2 Fitting 5 Plug
3 Cap 6 Lower Body
Figure 5-3 Disassembly of Upper and Lower Bodies.
6
4
3
2
5
1