Owner's manual

2 Safety
Dispensing system operation involves heat, air pressure, fluid pressure, mechanical devices, electrical
power, and the use of hazardous materials. Refer to the
Safety section of your particular dispensing
system Operations Manual prior to installing and operating your DispenseJet Series DJ-100.
Safety is considered a joint responsibility between the original equipment manufacturer (Asymtek) and the
end-user (owner). All safety precautions and practices should be in accordance with local regulations and
facility practice.
Safety Warning Symbols
Symbol Description
Personnel Safety Warning. This symbol appears in a
shaded text block to warn you about actions that could cause
personal injury or death.
Property Damage Caution. This symbol appears in a shaded
text block to warn you about actions that could cause serious
damage to the machinery, software, parts being processed,
and facilities.
Safety of Personnel
WARNING! Unsafe equipment conditions can result in personal injury or property damage.
Failure to adhere to safety warnings and precautions could result in serious
bodily harm to the user.
• Only trained personnel should be permitted to perform installation, operation, maintenance,
and troubleshooting procedures on the DJ-100 and the CON100 Amplifier Module.
• Before performing maintenance or service on the DJ-100, position it at the front of the
dispensing chamber. This will provide easy access to components and limit exposure to
hazardous areas.
• Immediately push the red Emergency Machine Off (EMO) button on your dispensing system
if personnel are in danger.
• Do not touch moving parts while the dispensing system is operating.
• Relieve pneumatic pressure before adjusting or servicing pressurized components.
• Allow the valve to cool before handling.
• Remove the DJ-100 completely from the dispensing system before cleaning or performing
maintenance.
1