Owner's manual

Sample Application Settings
See Table 7-2 and Table 7-3 for a list of settings that affect DJ-100 performance. Values are application
dependent. Refer to the Fluidmove User Guide or Online Help for detailed software instructions. Values
are saved in the Fluidmove configuration, fluid, heater, and program files. A column is provided for you to
record your current settings.
Table 7-2 Pneumatic Settings
Category Unit Current Settings
Fluid Pressure KPa (psi)
Table 7-3 Software Settings
Current
Category Parameter Units
Settings
Jet Pulse Time
(Jet on Time)
msec
Configuration, Setup
Valves…, Edit, Settings
Purge Interval ms
Pre-purge Rotations
Pre-purge Spacing (0.1 mil)
Pre-purge Delay ms
Fluid Manager
Purge Parameters
Vacuum Shutoff Delay
Vacuum Pre-Shutoff Delay
ms
ms
1000
0
Fluid Manager
Flow Rate Parameters
Fluid Manager
Pot Life /Low Fluid Check
Machine Offset
Parameters
Script file and settings
Set Point,
Other Settings
Setup Heater
°C
Settling Time, Down Speed, Accel
Gap, # Shots,
MS Delta Dwell, Retract Dist,
Retract Speed, Accel Post Dwell,
Dwell Time
Dot Parameters
Down Speed, Accel Gap, Speed,
Wt-Ctrl Speed,
Accel Dist, Decel Dist,
Retract Dist,
Retract Speed,
Accel Control Mode,
Shot Time Interval
Line Parameters
21