Owner's manual

Nozzle Sizes
The nozzle diameter can be determined from the marking on the nozzle plate. The following nozzle
diameters are available: 100µm, 150µm, 200µm, and 300µm. A 300µm nozzle is shown in
Figure 3-3.
Figure 3-3 Nozzle Diameter Marking
Table 3-1 Nozzle Codes
Nozzle Plate Code Nozzle Size (inner diameter)
10 100 µm
15 150 µm
20 200 µm
30 300 µm
Matching Serial Numbers
Each jet and its associated nozzle plate are precisely aligned at the factory and delivered as a matched
assembly with identical serial numbers on the jet and the nozzle plate. Be careful not to accidentally
interchange jets and nozzles when cleaning or performing maintenance.
Matching Serial
Numbers
Figure 3-4 Matching Serial Numbers
6