Quick Operations User Manual

48 Operation
Loading a Program
Programs can be loaded from both the ECXP Operator Screen (Figure 3-11) and the ECXP Edit Screen
Refer to the Century C-740/C-741 Installation, Operations, and Maintenance Manual for instructions on
loading a program from the Edit Screen.
To load a program from the Operator Screen:
1. If a program is currently running, click on the Stop
button.
! Production stops after the currently loaded product is coated.
2. Click on the Change Product button or double-click the Current Product field
(
Figure 3-11).
! The product map opens. The product map is a tree structure of the folders and subfolders
where the programs are stored.
- Click on a plus sign (+) to expand a group and view the product programs in that group.
- Click on a minus sign (-) to collapse a group.
3. Click on the desired program to select it. When selected, it is highlighted in blue.
4. Click on the OK button to load the selected program.
" NOTE Click on the Cancel button to exit the product map without loading a program.
Figure 3-11 Loading a Program - Operator Screen