Quick Operations User Manual

Introduction 1
1 Introduction
Overview
Congratulations on your choice of the Century C-740/C-741 Series Dispensing System! This manual is
intended primarily as a reference for production operators. However, others unfamiliar with Asymtek
products may also find this manual useful as a general introduction to the system.
The Century C-740/C-741 Series Dispensing Systems are designed to meet the diverse needs of the
conformal coating market. The C-740/C-741 systems provide consistent, uniform dispensing of a variety
of conformal coating materials for both conveyorized (C-740) and batch (C-741) coating applications.
Patented dispensing technology replaces traditional dip, brush, handgun, and aerosol spray systems with
field-proven, repeatable delivery of solvent-based and 100-percent solids materials. The system virtually
eliminates the requirement for labor-intensive board masking, providing accurately controlled patterns,
film builds, and production flexibility in an automated process. Film thickness is achieved in a single pass
with little or no masking and with virtually no overspray.
This section covers the following topics:
•
Basic System Description
•
System Features
Safety First
Operation of your C-740/C-741 Dispensing System involves heat, air pressure, pneumatic devices,
electrical power, mechanical devices, and the use of hazardous materials. Read this manual in its entirety
before attempting any system or component operation. It is essential for all personnel working on or
around the dispensing system to fully understand the hazards, risks, and safety precautions associated
with operating the dispensing system. When properly operated and maintained, the dispensing system
should be safe and reliable. Refer to the
Safety section for additional information.
The Century Series Dispensing System is installed and tested on-site by an Asymtek technician. To
ensure that the system is in good working order, only Asymtek-trained technicians should install, move, or
service the system
WARNING! CAUTION!
Consult the Material Safety Data Sheet (MSDS) for all fluids used with the
dispensing system. The MSDS provides material usage instructions, disposal
instructions, and safety precautions.
Basic System Description
All Century C-740/C-741 Series Dispensing Systems have a standard platform. Optional components
may be added to suit your particular requirements. Your system was configured for your application at the
Asymtek factory prior to shipping. Brief descriptions of all features are found later in this section.