Quick Operations User Manual

42 Operation
To Start ECXP:
1. Double click the ECXP
icon on the Windows desktop.
! As an alternative, you may click on the Windows Start menu and select
Programs > ECXP to start the ECXP software.
! The Dispenser will find Home in the Z-Axis, Y-Axis, and X-Axis, respectively.
! The ECXP Operator Screen shown in Figure 3-7 will open.
" NOTE The Operator Screen will vary slightly if the software is configured for a C-741 Series
Dispensing System.
Figure 3-7 Starting ECXP
" NOTE If ECXP does not start, or you receive error messages during start-up, please contact
Asymtek Technical Support.
2. To exit ECXP, click on
or select File > Exit from the Operator Screen menu bar.
" NOTE Refer to “Loading a Program” and “Running a Program” in the Operation section for
detailed instructions on system setup and running production.