Quick Operations User Manual

8 Introduction

Lower Front Cabinet

Below are descriptions of C-740/C-741 Series Dispensing System components shown in Figure 1-5.

1. Computer

The Computer System is used to create and run dispensing programs with the Asymtek Easy Coat

for Windows XP (ECXP) dispensing software.

2. Conveyor Controller Module (C-740)

The Conveyor Controller module monitors the SMEMA interface and controls the Conveyor indexing

operations. The inputs and outputs are used for sensors, Stop Pins, Board Pins, and operation of the

Conveyor. For more information on the Conveyor, refer to the

Operation section.

3. Tri-Mode Swirl Box (Optional)

The Tri-Mode Swirl Box is a component of the SC-200 and SC-300 Swirl Fluid Systems. It has two

air assist and two fluid regulators and gauges, which regulate the fluid and air-assist pressure to the

fluid applicator. By varying the pressures, conformal coating materials can be dispensed in a bead,

monofilament, or swirl pattern.

Item Description

1 Computer

2 Conveyor Controller Module

3 Tri-Mode Swirl Box (Optional)

Figure 1-5 C-740 Lower Front Cabinet