Instruction Manual

Power-up and Testing 5-5
5.5 Testing the System
After initial installation and power-up, the system must be tested to ensure that it is working properly.
This section includes the procedures for testing the following:
 Robot/Conveyor I/O  Conveyor Panel/Mechanics (C-740)
 Pneumatics  Dispensing System Options
 Robot (Dispensing Head) Function
These procedures should be performed on initial installation and after the machine has been moved
or serviced.
CAUTION! The following procedures should only be performed by a trained service technician.
5.6 Robot/Conveyor I/O
To test the Robot I/O:
1. Follow the instructions in
5.4 Starting Easy Coat for Windows (ECXP) to start ECXP.
2. Select
Edit > Edit Mode from the ECXP Operator Screen menu bar to access the ECXP
Edit Screen.
3. Select
Utilities from the Edit Screen menu bar (Figure 5-4).
Figure 5-4 ECXP Edit Screen - Utilities Menu