Instruction Manual

4-18 Installation
5. Select the item to be configured by clicking on it.
" NOTE To select more than one item, hold down the CTRL key while selecting
additional items.
6. When you are finished, click on
OK.
! The software must be restarted in order to perform the configuration.
7. To close the ECXP Edit Screen and return to the Operator Screen, click on
or select
File > Exit from the menu bar.
8. To exit ECXP, click on
or select File > Exit from the Operator Screen menu bar.
9. Restart ECXP to perform the configuration procedure. ECXP will prompt you to answer a
series of questions defining your system configuration.
" NOTE Prompts will vary depending on the items selected and answers to previous
prompts.
10. Once you have responded to all the prompts, the ECXP program will start.
" NOTE ECXP menu choices may vary depending on the answers to the prompts. Refer to
the Easy Coat User Guide for detailed instructions.