Instruction Manual

4-16 Installation
4.15 System Configuration
" NOTE If you change your system hardware, use the Reconfigure feature to run the setup
procedure again.
To reconfigure ECXP:
1. If necessary, install the ECXP software as instructed in the Easy Coat User Guide.
! The installation process is a typical Windows XP installation with user prompts.
2. After the installation is complete, start ECXP by double clicking the ECXP
icon on the
Windows desktop.
! As an alternative, you may click on the Windows
Start menu and select
Programs > ECXP to start the ECXP software.
! The ECXP Operator Screen (
Figure 4-6) opens.
Figure 4-6 ECXP Operator Screen
" NOTE The Operator Screen may vary depending upon system configuration.