Instruction Manual

Installation 4-7
To install the Monitor:
1. Locate the monitor, remove all packaging material, and place the monitor on the swing arm
(
Figure 4-2A).
2. Attach the monitor to the swing arm with the screws provided (
Figure 4-2A).
3. Connect the monitor cable to the monitor extension (
Figure 4-2B).
4. Connect one end of the power cable to the monitor and the other to the power cable extension
(
Figure 4-2B).
5. Locate the monitor power switch and turn it
ON (I).
Figure 4-2A Figure 4-2B
Item Description
1 Flat Screen Monitor
2 Swing Arm
3 Monitor Cable
4 Monitor Power Cable
Figure 4-2 Installing the Monitor
1
2
3
4