Instruction Manual

Installation 4-1
4 Installation
4.1 Overview
This section describes installation procedures for the Century Series C-740/C-741 Dispensing System and
covers the following topics:
•
Facility Requirements • Electrical Connections
•
Uncrating and Placing the Dispensing System • Exhaust Connection
•
Unpacking the Dispensing Area • Connecting Power and Air Supply
•
Unpacking the Accessories Crate • Earthquake Precautions
•
Leveling the Dispensing System • ECXP Configuration
•
Component Installation • System Configuration
•
Pneumatic Connections • Beacon Configuration
4.2 Safety First
Before performing any of the system installation procedures in this section, please review the information
presented in Section 2 - Safety.
4.3 Facility Requirements
To ensure optimal performance and safety, it is necessary to install the dispensing system in a facility that
meets or exceeds the requirements listed in Section 11 - Specifications. If you have any questions about
facility requirements, please contact Asymtek Technical Support.
WARNING! CAUTION!
Make sure that your facility meets all requirements listed in Section 11 -
Specifications. Failure to meet these requirements could result in serious
bodily injury to personnel and damage to the dispensing system.