Instruction Manual

3-8 Component Description
3.8.7 Flow Monitoring System
The Flow Monitoring System monitors the volume of material dispensed. The dispensing system can be
programmed to stop, pause, or continue when the dispensed volume falls outside the preset range. In
operation, the Computer controller, together with ECXP software, monitors the gear-type Flow Meter
when the coating sequence begins. ECXP software records the data in a log file and displays it on the
Monitor in bar graph format with time history.
Figure 3-4 Flow Meter
3.8.8 Hour Meter
The Hour Meter monitors the dispensing system operation hours for maintenance logging.
Figure 3-5 Hour Meter
3.8.9 Laser Pointer Programming Tool
The Laser Pointer Programming Tool projects a red dot onto the workpiece, which simulates the center
point of the dispensing module for faster identification of coating begin and end points. ECXP software
automatically compensates for the offset of the laser pointer-to-dispense-module centerline. The Laser
Pointer Programming Tool is factory configured at the time of system manufacture and reduces
programming time for faster production ramps.