Instruction Manual

3-6 Component Description
3.8.4 Dual Simultaneous Mounting Bracket
The Dual Simultaneous Mounting Bracket, mounted on the Dispensing Head, doubles dispensing
capability by accommodating two identical applicators side by side for simultaneous dispensing of a
single fluid. The two applicators are controlled independently by ECXP, enabling one coating sequence to
coat one or two products at a time. The system is configured for your specific application.
Figure 3-2 Dual Simultaneous Mounting Bracket
3.8.5 Dual Toggle Mounting Bracket
The Dual Toggle Mounting Bracket, mounted on the Dispensing Head, typically uses an SC-200, SC-300,
SC-105, or SC-205 Film Coater plus a needle type Dispensing Valve (such as Asymtek’s DV-03, DV-05,
or DV-09) to separately coat broad areas of the board, as well as areas requiring smaller amounts of
coating material. The system is configured for your specific application.