Instruction Manual

Component Description 3-1
3 Component Description
3.1 Overview
This section provides a closer look at some of the standard and optional accessories for your Century
C-740/C-741 Dispensing System. This section covers the following components:
Standard Equipment:
 Computer System
 Easy Coat for Windows XP Software
 Chain Conveyor (C-740)
 Board Pinning Assembly (C-740)
 Tooling Plate or Adjustable Tooling
Rails (C-741)
 Integrated Safety Systems
 Light Beacon
 Low Air Pressure Sensor
 Exhaust Vent Duct
 Flow Monitoring System
 Hour Meter
 Laser Pointer Programming Tool
 Inline Inverter Module
 Light Curtain
 Low Fluid Sensor (for external reservoir)
 Low Solvent Cup Sensor
 Material Change Over
 Upstream and Downstream SMEMA Sensors
Optional Equipment:
Fluid Delivery Systems:
 Bar Code Recognition System
 Board Present Sensor
 Brush Box
 Dual Simultaneous Mounting Bracket
 Dual Toggle Mounting Bracket
 Laser Fan Width Control System
 SC-104HS/SC-105HS High Speed Circulating Film
Coater
 SC-200 Slim Swirl Applicator
 SC-10XVCS Viscosity Control System
 SC-204HS/SC-205HS High Speed Non-Circulating
Film Coater
 SC-300 Swirl Coat Applicator
3.2 Safety First
Before operating or performing maintenance on any of the accessories described in this section, please
review the important information provided in Section 2 - Safety.
3.3 Troubleshooting
Refer to Section 8 - Troubleshooting, the applicable technical manual, or contact Asymtek Technical
Support if you have trouble with the accessories described in this section.
3.4 Maintenance
Refer to Section 9 - Maintenance, or the applicable technical manual, for maintenance of the accessories
described in this section.