Instruction Manual

Safety 2-5
2.5 Laser Radiation
The optional Laser Fan Width Control uses a Class II laser sensor. The following safety precautions
should be observed in addition to the standard coating system safety precautions.
• Operate the Laser Fan Width Control only according to the procedures described in the
instructions included. Failure to do so may result in injury due to exposure to the laser beam.
• DO NOT look directly at the laser beam.
WARNING! Looking directly at the laser beam may result in serious eye injury.
" NOTE The laser beam is not harmful to the skin. There is no danger in exposing arms or hands
to the beam. The only possible health hazard is in exposing the eyes to the laser beam.
Table 2-1 Laser Fan Width Control Specifications
ORGANIZATION CLASSIFICATION
FDA CLASS II
IEC 60825-1 1998-01 CLASS 2
DIN EN 60825-1 1998-01 KLASSE 2