Instruction Manual

Parts Replacement 10-1
10 Parts Replacement
10.1 Overview
This section includes general information for ordering recommended spares and replacement parts for
your Century C-740/C-741 Dispensing System. Part numbers can be found on the exploded parts
diagrams in Appendix C. This section also contains the following procedures:
• Parts Ordering Information
• Unpacking and Inspecting Replacement Parts
• Gaining Access to Dispensing System Components
• Replacing Conveyor Chains (C-740)
• Replacing Fuses
• Replacing Control Modules
"NOTE This section does not include the removal and replacement of Fluid Dispensing
Applicator components. Refer to the manual for your specific fluid applicator for
recommended maintenance procedures.
10.2 Safety First
Review the precautions in Section 2 - Safety before attempting to replace any parts.
WARNING! Parts replacement should only be performed by a trained service technician.
Asymtek assumes no liability for personal injury or property damage that may
occur as a result of spare parts being replaced by other than Asymtek-trained
technicians.
10.2.1 Hazardous Materials
Some part replacement procedures involve the use and disposal of hazardous materials. Always follow
the material manufacturer MSDS, facility requirements, and local regulations for protection of personnel
and disposal of materials.