Instruction Manual

Introduction 1-3
1.4 Basic System Description
All Century C-740/C-741 Series Dispensing Systems have a standard platform. Optional components may
be added to suit your particular requirements. Your system was configured for your application at the
Asymtek factory prior to shipping. Standard and optional equipment is listed below. Brief descriptions of
all features are found later in this section.
1.4.1 Standard Equipment
• Computer System • Integrated Safety Systems
• Easy Coat for Windows XP software • Light Beacon
• Chain Conveyor (C-740) • Low Air Pressure Sensor
• Board Pinning Assembly (C-740) • Exhaust Vent Duct
• Tooling Plate/Adjustable Tooling Rails (C-741)
1.4.2 Optional Equipment
• Bar Code Recognition System • Laser Pointer Programming Tool
• Board Present Sensor • Inline Inverter Module
• Brush Box • Light Curtain
• Dual Simultaneous Mounting Bracket • Low Fluid Sensor (for external reservoir)
• Dual Toggle Mounting Bracket • Low Solvent Cup Sensor
• Laser Fan Width Control System • Material Change Over
• Flow Monitoring System • Upstream /Downstream SMEMA Sensors
• Hour Meter
1.4.3 Fluid Delivery System
The Century C-740/C-741 Dispensing System can be configured with any of the following Fluid
Dispensing Applicators. Refer to 3.9 Fluid Delivery Systems for additional information.
Model Name
SC-104HS High Speed Film Coater (Circulating)
SC-105HS High Speed Film Coater (Circulating)
SC-10XVCS Fluid System, Viscosity Control
SC-204HS High Speed Non-Circulating Film Coater
SC-205HS High Speed Non-Circulating Film Coater
SC-200 Slim Swirl Applicator
SC-300 Swirl Coat Applicator
" NOTE Each of the Fluid Delivery Systems has its own manual. Refer to the specific manual for
the Fluid Delivery System installed on your dispensing system for detailed installation
information.