Instruction Manual

Configuration and Characterization 7-17
7.12 Reconfigure
If you change system hardware, such as the tool, conveyor, inverter, or scanner you can rerun the ECXP
setup procedure with the Reconfigure feature. The changes are written to the ECW.INI file.
1. Click on
Configure > Reconfigure.
! The Configure dialog box opens.
2. Select the system hardware you want to reconfigure.
" NOTE To select more than one item, hold down the [Ctrl] key while selecting additional items.
3. Click on the
OK button.
4. Exit ECXP.
5. Add your new hardware or make the desired changes to your existing hardware.
6. Restart ECXP.
! Depending on the hardware, one or more dialog boxes will step you through the
setup procedure.
7. If you have added a new tool, configure the tool and run a characterization from the
Configure > Tools menu.
" NOTE Do not use the Reconfigure function if you have not been trained to configure the
dispensing system. Contact your Asymtek representative for additional information
and assistance.