Instruction Manual

1-2 Introduction
1.3 Getting Started
1.3.1 System Status
The Century Series Dispensing System is installed and tested on-site by an Asymtek technician. To
ensure that the system is in good working order, only Asymtek-trained technicians should install, move,
or service the system.
1.3.2 Training
In order to optimize the full capabilities and features of your dispensing system, Asymtek recommends
certification for all operators, technicians, and engineers using, programming, and servicing the
dispensing system.
Asymtek offers several levels of training courses to enable customer operators, technicians, and engineers
to become fully certified in dispensing system safety, operation, hardware, software, and fluid
applications. For more information on training courses and certification, contact Asymtek.
1.3.3 Manuals Supplied
Your Century Series Dispensing System arrives with manuals for installation and operation of major
system components and software. For some system components, you may receive Original Equipment
Manufacturer (OEM) manuals. Generally, these OEM manuals are only needed for reference and
advanced troubleshooting. Consult only Asymtek manuals, unless directed to do otherwise by Asymtek
Technical Support or Asymtek documentation. For the convenience of Asymtek customers, manuals may
be downloaded from:
http://www.asymtek.com/support/manuals.htm.
Below is a sample list of manuals that may be shipped with a Century Series Dispensing System.
Optional manuals listed may or may not be included, depending on your system’s configuration.
• Century Series C-740/C-741 Installation, Operations, and Maintenance Manual (P/N 194589)
• Century Series C-740/C-741 Quick Operations Manual (P/N 211035)
• Fluid Dispensing System Manual (specific to your application)
- SC-100 Series High Speed Film Coater (P/N 108384)
- SC10XVCS Viscosity Control System (P/N 7204869)
- SC-204HS High Speed Non-Circulating Film Coater (P/N 106966)
- SC-205 Non-Circulating Film Coater (P/N 107101)
- SC-200 Slim Swirl Applicator (P/N 303776)
- SC-300 Swirl Coat Applicator (P/N 7201127)
• Easy Coat for Windows User Guide (P/N 7203045)
Optional:
• Laser Fan Width Control Owner’s Manual (P/N 7201445)
• Flow Monitoring System Installation, Operations, and Maintenance Manual
• Original Equipment Manufacturer Manuals (as applicable)